Clear Craft Shapes Guide — PETG Blanks for Stencils, Resin and Painting
12-packs of clear, laser-cut PETG blanks — circles, squares, hexagons, triangles, pentagons, ovals and stars — for painting, resin, stencilling and craft projects.
Quick Fixes — Read This Before Returning
- “They look cloudy or scratched.” Each shape ships with protective film on both sides. Peel it off — the clear surface is underneath.
- “They warped.” PETG softens above about 70°C (160°F). See “Heat” below before using a heat gun, oven, heat press or hot resin.
- “Paint peels off.” PETG is smooth. Lightly scuff with fine sandpaper, clean with isopropyl alcohol, and use a primer or paint made for plastics.
What You Have
- 12 shapes per pack, 1.6mm (1/16") clear PETG.
- 3.75" (95mm) Circles, Squares, Hexagons, Triangles, Pentagons, Ovals and Stars; 3" (76mm) Squares.
Heat
Not for sublimation, heat presses or ovens. PETG softens at about 70°C (160°F) — far below sublimation temperatures.
- Most craft resins are fine. Very large or thick pours can get hot as they cure — pour in thinner layers.
- Keep away from ovens, irons, heat presses and heat guns.
Ideas
- Stencils — trace around them or use them as masks for paint and ink.
- Ornament and gift-tag blanks — paint, decoupage, vinyl or paint pen.
- Coaster or resin bases.
- Classroom geometry — the shapes are accurate enough to tessellate and measure.
- Laser engraving.
Looking After Your Shapes
- Leave the film on until you need them; it stops scratches in storage.
- Clean with isopropyl alcohol or soapy water. No acetone.
When to Email Us
Email sales@clpa.au with your order number and a photo if your tool arrives damaged, you ordered the wrong size, or a printed line looks off-register. We aim to reply within one Brisbane business day — if you are in the USA or UK, remember we are a day ahead.
Returns
Bought from clpa.au? You have 30 days after receiving your item to request a return. The item must be unused, in the condition you received it and in its original packaging. Email sales@clpa.au to start a return — items sent back without a return request cannot be accepted. Full details, including your rights under the Australian Consumer Law, are in our Refund Policy.
Bought on Amazon? Amazon’s return policy applies to your order.
More help: Frequently Asked Questions.
We Make What We Sell
Custom Laser Products Australia (CLPA) is a small veteran-owned family business. We design, laser-cut and UV-print every tool on the Sunshine Coast, Queensland. We are the manufacturer, not a reseller.
CLPA Customer Support · sales@clpa.au · clpa.au